Zoom
Description
Brand new sealed printer with toner cartridge and drum.
: Make sure that all of the accessories are installed before upgrading the firmware. This is the only way to update the firmware on the accessories.
Accessories might not update automatically if attached later.
• Wait for the printer to complete the firmware update process. The printer automatically reinitializes several times (this might take up to 30 minutes to complete,
so be patient and do not interrupt the firmware process).
• After the printer reaches the Ready state, wait another 2-5 minutes to allow the printer firmware to finish copying firmware to all of the PCAs.
• Print a configuration page and make sure that the firmware is correctly updated and confirm that LPDC status is “Not configured (XX, XX, XX)”.
• Press the power button on the front of the printer, and then turn off the main power switch (near the power cord).
NOTE: The printer speed cannot be changed after it is set by the LPDC license. The printer serial number is locked to the speed setting, based on what was ordered
by the customer, and is placed in HPI’s license activation site located in the cloud.
• Connect the network cable to the printer.
• Turn on the main power switch (near the power cord), and then press the power button on the front of the printer. Wait for the printer to reach the Ready state.
• Make sure that the printer has a valid IP address and a working internet connection. A proxy server might need to be configured at this time in the EWS or directly
input into the control panel menu.
• Wait for the LPDC process to automatically start (within 10 minutes of having a working internet connection).
NOTE: The printer reboots after the LPDC process is complete, and the printer setup wizard starts.
• When the Setup Wizard appears, reconfigure each of the settings.
• Wait at least 5 minutes after the printer comes to a Ready state to allow the LPDC process to complete.
CAUTION: Do not turn the printer power off during this time.
• Print another configuration page and make sure that the LPDC is configured with the correct license speed and that the printer model number is correct.
The printer product model changes to the ordered model number. In the LPDC status, the first number in the parentheses (x) is either "0", "1" or "2”.
The "0" corresponds to the slowest speed, "1" is the middle speed, and "2" is the fastest speed. This confirms that the LPDC process is complete.
NOTE: If the automatic installation fails, if no internet connection is available, or if the LPDC process is not possible via the network connection, the speed license
can be downloaded to a USB flash drive and manually installed.
Key Features:
Printer Type: Color Department Managed Printer Print Speed: Up to 33 ppm (black and white), up to 13 ppm (color) Print Resolution: Standard resolution for black and white and color prints Paper Handling: 100+-sheet input tray, 25+-sheet output tray Connectivity: Wireless, USB, RJ-45 Supported Media Sizes: Letter, legal, envelopes, and more Supported Operating Systems: Windows, Mac
Additional Details:
Toner: All New Condition
Package Contents:
1 x HP Printer Power Cable USB Cable
Cartridge
Drum
Manual
Our Customers Speak for Us
Eco-Friendly Tech That Saves You Money and the Planet
Wishlist
Wishlist is empty.
Compare
Shopping cart